SVSTEMPLACEMENT
Placement
guidelines
Figure 1
System placement example
The information
in
this section shows you how
to
place your system
in
a room
to
create a
home theater atmosphere (Figure
1).
You
should try
to
arrange your system as close
to
this
as possible.
Placing your speakers and Acoustimass® module properly is the first step
to
getting the full,
rich
Bose®
quality sound this system
is
designed
to
provide.
Righ!_
front
'R
Media
center
placement
Place the media center on a flat, stable surface. Until your system is completely installed, it's
a good idea to keep the media center positioned for easy access
to
its rear connection panel.
•
00
not block the front
of
the media center. Make sure you can see the display window
on the right side and allow enough room
to
lift up the front door and open the CO/DVD
tray.
• Make sure there is space within 6 feet
(1
.8
m)
behind it
to
place the VS-2 video
enhancer.
• Make sure the audio cables from your sound sources (cable/satellite box,
OVR,
VCR,
or other) can reach the media center connection panel.
• Make sure the 30
ft
(9.1
m)
audio input cable can reach from the media center connec-
tion panel
to
the Acoustimass module.
VS-2 video
enhancer
You
can place the VS-2 video enhancer directly behind the media center or on the floor,
or mount it on a wall. See "Mounting the VS-2 video enhancer" on page 34.
• Make sure the 6
ft (1.8
m)
VS-2 cable can reach from the VS-2
to
the media center.
• Make sure video cables from your video sources (cable/satellite box,
OVR,
VCR,
or other) can reach the VS-2 connection panel.
8
To Next Page
Loading...
