FIRST-TIME
OPERATION
1
Prepare
your
TV
•
Turn
off
your
TV
sound:
To
allow your
LIFESTYLE®
system to provide the premium sound
it is designed
to
deliver, the internal speakers
in
your
TV
should be turned off.
OPTION A - Turn the volume down all the way. This is the easiest method.
OPTION B - Change the speaker on/off setting
in
the onscreen
TV
setup menu. If you need
help, refer
to
the owner's guide that came with your
TV.
•
Select
the
right
video
input
on
your
TV: Select the video input that is connected
to
the
VS-2 output. This is usually done
in
the features menu
of
your
TV.
Refer
to
your TV owner's
guide for help.
2
Open
the
ADAPTiQC!)
audio
calibration
system
carton
Your system includes the
Bose®
ADAPTiQ®
audio calibration system. It includes
two
compact
discs and a special ADAPTiQ calibration headset (Figure 16).
• Play both discs when all
of
the speakers are where you want them, your furnishings are
arranged as intended, and all
of
the system connections are completed.
• Allow approximately 30 minutes to complete the process.
• Begin the process when you are unlikely
to
be disturbed and when the acoustic
measurement tones are unlikely
to
disturb anyone else.
Figure
16
Contents
of
the ADAPTiQ
audio calibration system
carton
24
Disc
1 - Verifies that your speakers are connected correctly
and offers information you may find useful.
Disc
2 - Includes the ADAPTiQ audio calibration system and
provides instructions for using it. The ADAPTiQ calibration tailors
the sound
of
your
LIFESTYLE®
system very specifically
to
the
acoustics
in
your room.
ADAPTiQ
calibration
headset
- Designed
to
be worn above
your
ears, this special headset takes acoustic measurements for
you during the calibration process. Put on the headset only when
prompted by Disc
2.
You
can play Disc 2 and calibrate your system again if you need
to
move any
of
the speakers or move the system
to
another room.
To Next Page
Loading...
