Bose Lifestyle DVD - Mounting the VS-2 Video Enhancer; Reference

REFERENCE
Mounting the VS-2 video enhancer
For convenience, the V8-2 video enhancer can be mounted on a wall.
Required tools
No.8 (86) -----
wall anchor
/~ ~H/
No.8 x 1Y2-inch
(86 x 36 mm)
wood screws
No.8 x 1Y2-inch (86 x 36 mm) --- ~-------+lIIII'=~~
wood or machine screws
(depends on type of wall anchor)
~
Use drill size specified
for type of wall anchor
used.
~
YS-inch (3.5 mm) drill bit
For wallboard
For solid wood
Required hardware
Wall mounting
11' Install two screws 12 inches apart. Leave 5116 inch
\V (7.9 mm) between wall surface and screw head.
®
Position the VS-2 mounting holes
2 over the screws so that it is flush
with the wall.
®
Lower the VS-2 onto the
screws to lock it in place.
G~ 12"
(30.5 cm)
34