BASIC
SYSTEM CONNECTIONS
3
Connect
the
media
center
to
the
module
Figure
7
Acoustimass connection
to the media center
Use the audio input cable, which has a multi-pin connector at each end,
to
connect the
Acoustimass® module
to
the media center.
A.
With the flat side
of
the multi-pin connector facing toward the front
of
the module,
plug one end
of
the audio input cable into the
Media
Center
connector on the
Acoustimass module connection panel (Figure
7).
B.
Plug the other end
of
the cable (flat side
of
plug facing up) into the
Main
Speakers
connector on the media center connection panel.
C.
Make sure that each connector is fully inserted into the jack.
Media
Center
connector
Main
Speakers
connector
Media
center
connection
panel
Audio input cable
A
CAUTION:
00
not
put
strain on the audio input cable where it connects to the module and
media center. Excessive strain, caused
by
pulling directly on the cable
or
by
compressing
it,
can
cause damage.
15
To Next Page
Loading...
