Product Descriptions
Surgical Implant Manual
92495783-02 Page 13 of 1157
Surgical Tools and Accessories
Lead Boot
The Lead Boot protects the proximal end of the implanted Lead until the IPG implant surgery. The
Setscrew on the Lead Boot is used to secure the Lead in the Lead Boot when screwed onto the
retention sleeve.
The Lead Boot provided in either of the kit types listed below is compatible with 8 Contact Leads:
• An 8 Contact Lead Kit
• Vercise Physician’s Spares Kit
Table 20: Technical Specications
Lead Boot
Feature Specication
Overall Length 3.3 cm
Setscrew Material Titanium
Connector Block Material Stainless Steel
Endstop Material Stainless Steel
Insulation Material Silicone
To Next Page
Loading...
