Multi-DM™ User Manual Section 6 - BMC SDK Software Installation
BMC Document Number: DOC-0009 Rev. 5.2 Page 17
6. BMC SDK Software Installation
Make sure to complete the BMC SDK software installation per this section
BEFORE attaching the Multi Driver.
Installing the Multi Driver first can result in errors during installation.
This section contains the following topics:
Section 6.1, BMC SDK Software Installation Instructions
Section 6.2, Device-Specific File Installation
Follow the procedures in each section in the order shown.
The procedures in this section describe installation of the Windows version
of the BMC SDK.
If you have the Linux version of the SDK, refer to the installation instructions
that were supplied with it.
As with all software installations, before starting make a drive image,
backup the operating system configuration, or set a Windows Restore Point
to aid in recovery in case of any errors during the installation.
To Next Page
Loading...