BowFlex Treadmill 10 & 22 - CALIBRATE MCB
"Procedure 4"
Applicable for the Treadmill 10 & 22 only
Follow these steps to calibrate the treadmill's MCB
(BowFlex® | How to Calibrate a BowFlex Treadmill)
1. From the Start-Up screen, tap on the upper-right corner of the Console Display 10 times. The Console will display the
“Advanced User Actions” menu.
2. Tap on the “Assembly App” option.
3. From the “Assembly App” menu, tap CALIBRATE in the upper right corner of the Console Display. The Console will
shift to Calibrate mode.
4. From the “Calibrate” menu, tap BEGIN TEST SUITE.
Be sure the area around the Treadmill is clear of all bystanders, children and pets.
Be sure there is nothing on or under the Walking Belt, or near the Treadmill.
5. The Console will display “CALIBRATE_MCB-USER CONFIRM”. Tap CONFIRM, and the calibration procedure starts.
Note: The calibration procedure will begin by automatically moving the Walking Belt and adjusting the incline
of the Walking Deck. Be sure not to touch or allow anyone else to touch the machine while calibration is
occurring.
6. When calibration is complete, the Console will display “CALIBRATE MCB - PASS”.
7. Tap EXIT in the upper-right corner of the Display to exit the Calibrate Mode.
8. Flip the power switch to OFF. Calibration is now complete for the machine.
9. If the MCB Calibration failed:
Beltdid not move at any point during the MCB test:Treadmill 10 and 22: Why won't the belt move?
ID:13537.2
To Next Page
Need help?
General