3. If a button is stuck, order a replacement part according to the chart below[15099.A]:
Replacement Part by Button ID Chart
Button ID Button Name Button Description Replacement Part
0 ERGO_INCL_DWN Ergonomic Incline Down Button Upper (Ergonomic) Handlebar - Left
1 ERGO_INCL_UP Ergonomic Incline Up Button Upper (Ergonomic) Handlebar - Left
2 ARM_INCL_DWN Arm Incline Down Button Lower (Arm) Handlebar - Left
3 ARM_INCL_UP Arm Incline Up Button Lower (Arm) Handlebar- Left
4 RESERVED_0 RESERVED (unused) Button N/A
5 ARM_SPD_DWN Arm Speed Down Button Lower (Arm) Handlebar - Right
6 INCL_9 Incline Level 9 Button Console Base
7 FAN Fan Button Console Base
8 SPD_4 Speed Level 4 Button Console Base
9 ARM_SPD_UP Arm Speed Up Button Lower (Arm) Handlebar - Right
10 INCL_NEG_5 Incline Level -5 Button Console Base
11 INCL_12 Incline Level 12 Button Console Base
12 RESERVED_1 RESERVED (unused) Button N/A
13 SPD_5 Speed Level 5 Button Console Base
14 STOP Stop Button Console Base
15 INCL_0 Incline Level 0 Button Console Base
16 INCL_15 Incline Level 15 Button Console Base
17 SPD_1 Speed Level 1 Button Console Base
18 SPD_7 Speed Level 7 Button Console Base
19 RESERVED_2 RESERVED (unused) Button N/A
20 INCL_3 Incline Level 3 Button Console Base
21 INCL_20 Incline Level 20 Button Console Base
22 SPD_2 Speed Level 2 Button Console Base
23 SPD_9 Speed Level 9 Button Console Base
24 SPD_12 Speed Level 12 Button Console Base
25 INCL_6 Incline Level 6 Button Console Base
26 START Start Button Console Base
27 SPD_3 Speed Level 3 Button Console Base
28 ERGO_SPD_DWN Ergonomic Speed Down Button Upper (Ergonomic) Handlebar - Right
29 ERGO_SPD_UP Ergonomic Speed Up Button Upper (Ergonomic) Handlebar - Right
If a stuck button was not identified, isolate which wire is causing the buttons to be unresponsive:
1. Check the Console Base buttons:
a. Disconnect the power cord from your machine.