M211 User Manual 5
Setup
Power and Battery
Power and Battery
Power is supplied to the M211 printer from an internal lithium ion battery, or from an AC or USB power
adapter.
Power Adapter
The printer can be powered and charged through an AC/DC power adapter or by plugging into a USB
port on a laptop or in a vehicle. When the adapter is plugged in, it is also charging the battery.
Note: For best results use the USB to AC wall adapter that came with the printer. This adapter
provides at least 15 W. The printer will take longer to charge with an adapter that is less than
15 W. Also, charging from a USB type A port generally provides less than 15 W and thus may
not charge as well.
For rapid charging, use the AC adapter to plug the printer into a wall outlet.
WARNING! To prevent risk of fire, electrical shock, explosion, or damage, read
below.
• Do not expose the printer to temperatures above 110
o
F
(43
o
C).
• Do not disassemble, mistreat, or attempt to replace
components in the printer.
• Do not incinerate the printer. Keep the printer away from heat
sources.
• Keep the printer away from water.
• Never lay objects on top of the printer.
• Store the printer in a cool, dry place.
• The printer must be recycled or disposed of properly according
to federal, state, and municipal regulations.
Catalog Number Region
M211-AC North America
M211-EU-UK-US-AC Europe, Middle East, Africa
M211-APAC-AC Asia-Pacific
To Next Page
Loading...
Need help?
General
