Brady M211 User Manual

M211 User Manual 13
Setup
Recycling the Cartridge
Dismantling the Cartridge
To dismantle the cartridge:
1. Using the flathead screwdriver, pry off the smart cell on the bottom of the cartridge by placing
the screwdriver blade under a corner of the smart cell and lifting up.
The chip is glued on and should release fairly easy.
2. Starting at the narrow end of the cartridge, insert the flathead screwdriver into the seam of the
cartridge, then twist the screwdriver slightly to loosen the two outside pieces of housing.
Repeat at various points around the seam.

Brady M211 Specifications

General

Print Technology	Thermal Transfer
Connectivity	Bluetooth
Display	LCD
Print Resolution	203 dpi
Cutter Type	Manual
Max Print Width	0.75 inches
Power Source	Rechargeable Battery
Maximum Label Width	2.25 inches
Print Speed	0.4 inches per second
Label Compatibility	M21 Series Labels
Label Width	0.25 in to 0.75 in
Max Label Length	3 ft
Keyboard	None (uses mobile app)
Memory	No
Supported Materials	Polyester, Vinyl