M211 User Manual 10
Setup
Printer Settings
2. Open the Express Labels app on your mobile device. The
software detects the new printer. Change the printer name if
desired and tap the control to connect the printer.
Disconnecting
If you need to disconnect a device, hold the power button on the printer for five seconds until the
Bluetooth light begins blinking.
Printer Settings
All settings are configured in the Express Labels mobile app. Most settings (like language and
measurement units) are software-wide and not specific to one printer model. The only settings that you
may wish to change for the M211 printer are the shutdown time and the printer name. These settings
are not retained on the printer. Another user connecting to the printer will start with the default settings.
Shutdown
In order to save power, the printer can shut down after a period of inactivity. The default setting is to
shut down after 30 minutes of inactivity.
To set the inactive period, open a label file for the M211 printer and tap the gear icon for a list of
properties.
Printer Name
The printer name is the printer model and serial number. You may wish to use a more descriptive
name in the Express Labels app.
If you wish to change the printer name, open the list of printers in the Express Labels app and tap the
more menu for an option to rename the printer.
Loading Cartridges
The M211 printer uses M-21 series cartridges which combine the ribbon and labels in
one cartridge. Only use cartridges that have the Brady Authentic logo.
Brady cartridges come equipped with smart-cell technology that enables the printer and
Brady labeling software to recognize the type of label and automatically set many label
formatting details.
To Next Page
Loading...
Need help?
General
