M211 User Manual 17
Setup
Accessories
Magnet
Use the magnet accessory, purchased separately, to attach the printer to magnet-receptive metal
surfaces such as panels and I-beams.
Dispose in accordance with federal, state, and local regulations.
To attach the magnet accessory to the printer:
1. Slide the magnet keeper plate off of the magnet.
WARNING! The magnet accessory contains a neodymium magnet.
• Strong magnets may interfere with proper operation of heart pacemaker,
defibrillator, insulin pump, or other medical devices. Keep magnets a sufficient
distance from anyone wearing these devices.
• Do not use magnets in explosive atmospheres.
• Do not give children strong magnets (especially neodymium). Keep this
product out of the reach of children.
• Many magnets are brittle and may shatter if they “jump” together or jump onto
a steel surface. Always wear eye protection if this is likely to happen.
• Analog watches, televisions, and computer monitors can be permanently
damaged by placing magnets near them.
• Strong magnets may affect or interfere with sensitive electronic instruments
and navigation equipment. Always keep magnets a sufficient distance from
such devices.
• Magnets can destroy information stored on magnetic media such as credit
cards, tape drives, and computer hard drives. To preserve your data, keep
these and other magnetic media away from the product.
To Next Page
Loading...
Need help?
General
