M211 User Manual 20
Getting Started
Creating Labels
Battery
The battery status light has the following meanings:
• Pulsing green: Charging
• Green: 51-100% charge remaining, or charging completed
• Orange: 21-50% charge remaining
• Red: 11-20% charge remaining
• Flashing red: Less than 10% charge remaining
Error
The error light has the following meanings:
• Flashing orange: There is a critical error that prevents printing.
Open the Express Labels app on
the connected device to see the specific error message. For help correcting the error, see “Error
Messages” on page 28.
• Solid orange: A non-critical error has occurred. You may dismiss the message in the Express Labels
app and continue printing.
Creating Labels
Create label files using the Brady Express Labels app. When you first create a label file, you specify
the printer. This allows the software to provide features specific to your printer. Also, the software
automatically detects the cartridge installed in the printer. See “Software for Creating Labels” on
page 9.
Printing
Before printing, you must use a software program to create labels. See “Software for Creating Labels”
on page 9.
To print labels:
1. Make sure the printer is on and the cartridge is locked.
2. On the mobile device, open the label file.
3. Tap the print button in the software.
The software sends the labels to the printer.
If a print job is interrupted, for instance when the cartridge runs out, the system automatically stops the
print job and lights the error indicator. The Express Labels app displays a message indicating that the
cartridge has run out.
IMPORTANT! When not using the printer, be sure to unlock the cartridge.
If the cartridge is left
To Next Page
Loading...
