Brady M211 User Manual

M211 User Manual 19
3 Getting Started
Controls and Status
A panel on top of the printer contains the power and cut buttons and three status lights.
Additional status information, such as remaining material in the cartridge, can be found in the Brady
Express Labels app.
Power
The power button can turn the printer on, reboot, or disconnect from a device depending on how long
you hold it.
• Tap: Turns the printer on or off.
• 5 seconds: Resets the Bluetooth allowing a new mobile device to connect.
• 15 seconds: Reboots the printer.
Cut
Cutting occurs automatically depending on the cut setting in the label file. To manually cut, press the
cut button on the printer.
Bluetooth
The Bluetooth status light has the following meanings:
• Pulsing light: The printer is broadcasting a Bluetooth signal for pairing.
• Solid light: The printer is paired with a mobile device.
Only one mobile device can be connected at a time.
To disconnect from a device, hold the power button on the printer for five seconds. The Bluetooth light
pulses to indicate that the printer is looking for a device to connect to.
Bluetooth
Battery
Error
Cut Power

Brady M211 Specifications

General

Print Technology	Thermal Transfer
Connectivity	Bluetooth
Display	LCD
Print Resolution	203 dpi
Cutter Type	Manual
Max Print Width	0.75 inches
Power Source	Rechargeable Battery
Maximum Label Width	2.25 inches
Print Speed	0.4 inches per second
Label Compatibility	M21 Series Labels
Label Width	0.25 in to 0.75 in
Max Label Length	3 ft
Keyboard	None (uses mobile app)
Memory	No
Supported Materials	Polyester, Vinyl