CAP. 4 - LAYOUT OF THE MANUAL 14 / 77 ENGLISH
M
ULTIGAS 8500 PLUS
CAP. 4 - LAYOUT OF THE MANUAL
4.1 USE OF THE MANUAL
This manual is an integral part of the equipment and must be kept in the
equipment's immediate vicinity by the purchaser
• If the equipment is sold on to a new user, this manual must accompany it.
• The content of this manual has been drawn up in compliance with the guide lines of the
UNI standard 10893:2000.
• Diffusion, modification or use of this manual for own aims is forbidden.
• The manual uses symbols which call the reader's attention to specific points to facilitate
its use.
• It includes all technical, operating, shutdown, maintenance, spare parts and safety
information.
• In case of doubts on the correct interpretation of the instructions, please contact our
technical service to obtain the required clarifications.
Operations which are potentially hazardous for the operator are highlighted
with this symbol.
Such operations can cause serious injury.
Operations requiring special attention are highlighted with this symbol.
Such operations shall be carried out correctly to avoid causing damage to
objects or to the surrounding environment. This symbol also highlights
information to which special attention must be paid.
Operations which require careful reading of the manual's instructions are
highlighted with this symbol.
4.2 SYMBOLS
This paragraph describes the safety symbols which may be posted on the service equipment's
housing.
4.2.1 Safety
ALTERNATING CURRENT
SAFETY GROUNDING
CONSULT THE INSTRUCTIONS MANUAL
CAUTION! ELECTROCUTION HAZARD
CAUTION !: DO NOT REMOVE THE COVER
(maintenance technicians only)
SEE THE USER MANUAL
USE PROTECTIVE GLOVES
WEAR PROTECTIVE GOGGLES
To Next Page
Loading...
