CAP. 2 - GENERAL INSTRUCTIONS 6 / 77 ENGLISH
M
ULTIGAS 8500 PLUS
2.4 WARRANTY
DEFINITION
The warranty provides for free replacement or repair of faulty components due to fabrication.
APPLICATION
The following warranty conditions are inclusive and substitute and legal guarantees in relation to
failures of conformity, and exclude any other liability of the manufacturer and reseller in relation
to the product. The purchaser may not make any claim other than those envisaged in these
warranty conditions, for damages, reduced price or cancellation of the contract. Once the
warranty has expired, no claims may be made against the reseller or manufacturer.
WARRANTY PERIOD
- 12 (twelve) months from the date of online activation by the reseller.
- 6 (six) months for replacement parts
EXCLUSIONS
This warranty is provided on condition of full payment of the purchase price and the purchaser
may not make claim under it if he has suspended payments for any reason whatever. The
warranty does not cover parts found to be defective for reasons of:
1. negligent use (failure to follow the operating instructions):
2. incorrect installation or maintenance;
3. maintenance by unauthorised persons;
4. shipping damage;
5. or any circumstances not resulting from fabrication defects.
The warranty does not cover any work done to install and connect the equipment to its power
supplies and feeds.
The following are excluded from the warranty / advance replacement:
- consumables (including: batteries, paper, filters, oil);
- normal wear and tear.
The warranty is void in all cases of improper use and failure to run the scheduled maintenance
detailed in the manual. Brain Bee S.p.A. accepts no responsibility for any damage deriving from
the non respect of the prescriptions indicated in the instructions and in particular those
concerning the tool installation, use and maintenance.
To Next Page
Loading...
