BrainBee MultiGas 8500 Plus - Automatic Cycles for A;C Servicing; Preliminary Steps for Automatic Cycles; Automatic Cycle - Vehicle Database

CAP. 11 - AUTOMATIC CYCLES 44 / 77 ENGLISH
M
ULTIGAS 8500 PLUS
CAP. 11 - AUTOMATIC CYCLES
11.1 PRELIMINARY OPERATIONS
It is necessary to connect both the LP (low pressure) – and HP (high pressure) couplers to the vehicle
A/C system (Screw the valves only when required by the A/C station).
Select the service mode (manual or automatic) and follow instructions.
11.2 AUTOMATIC CYCLE
Upon tool switch-on, the menu of the database storing vehicles divided by maker, model, and type
of A/C system is displayed.
The selected car flashed, press
to change selection and to confirm selection.
Press
to go back to the previous field.
11.2.1 Vehicle selection from database
Brain Bee offers customers purchasing a MULTIGAS 8500 PLUS the possibility of enhancing
potentials of the UNIT through the database.
This database contains all data related to the A/C system of most vehicles. Hence, it will be possible
to speed up the recharge operations of the system with the aid of the data provided by the
database.
• Type of vehicles
o European and Asian
o America
o Australian (Australian vehicles database - option)
o Agri&Work (Agricultural machinery database - option)
• Maker
• Model
• Version / engine capacity
• Year
• System
11.2.2 Last cycle
It loads the parameters of the last automatic cycle
11.2.3 User-defined cycles
It allows loading the parameters of the automatic cycle previously saved by the user.