Need help?Do you have a question about the BrainBee MultiGas 8500 Plus and is the answer not in the manual?
Defines dangerous areas, operators, and lists personal safety duties and precautions.
Lists prohibited operations and key safety precautions for using the service equipment.
Offers essential precautions for refrigerant storage and safe handling practices.
Explains the touch screen operation, menu navigation, and function selection.
Details the purpose and operation of various function keys on the unit.
Lists main functions like recovery, recharge, oil injection, and recycling modes.
Provides instructions for unpacking, including safety warnings for overturning.
Covers handling, positioning, installation, and electrical grounding for the unit.
Guides through the initial tank filling process, including checks and safety measures.
Selects recharge method (Quick/Zero Tolerance) and enables/disables pressure check.
Covers vehicle preparation, hose attachment, and identifying data needs.
Stresses knowing refrigerant type and oil quantity for successful recharge.
Details the two recharge modes: Quick mode and Zero Tolerance mode.
Details selecting vehicles from database, last cycle, and user-defined cycles.
Explains setting refrigerant amount, oil injection, oil type, and injection type.
Describes how to replace the oil type and the associated hybrid function.
Explains how to start and perform the refrigerant recovery function.
Guides on setting vacuum time and performing the vacuum phase and test.
Details setting refrigerant amount, oil injection, and injection type.
Describes the internal leak test including hoses emptying and vacuum test.
Details the special function to optimize vacuum pump oil life and replacement.
Guides on replacing the dehydrator filter after 45 kg of refrigerant fluid.
Details filling the storage vessel with refrigerant, following safety instructions.
Lists warning messages like 'REPLACE VACUUM PUMP OIL' and their solutions.
Details alarms related to EEPROM, pressure safety switch, and ADC converter.
Lists alarms for circuit pressure, vessel refrigerant levels, and injection failures.
Covers alarms related to LP/HP leakage detected during gas recovery phases.
General| Brand | BrainBee |
|---|---|
| Model | MultiGas 8500 Plus |
| Category | Accessories |
| Language | English |
To Next Page
