ENGLISH 5 / 77 CAP. 2 - GENERAL INSTRUCTIONS
M
ULTIGAS
CAP. 2 - GENERAL INSTRUCTIONS
2.1 GENERAL NOTES
All rights reserved.
This manual may not be reproduced, in part or entirely, either in printed or digital form.
It may be printed out solely for use by the user and operators of the equipment to which it refers.
BRAIN BEE SPA and its staff (authors of the manual) are not liable for any consequences of
improper use of the manual or equipment, and guarantees that the information given in the
manual has been thoroughly verified.
The product can be subject to changes and improvements. Brain Bee reserves the right to change
without notice the information contained in the manual.
2.2 GENERAL INSTRUCTIONS
Pressure equipment undergoes checks before commissioning and periodical checks during
operation in compliance with rules and law provisions in force in the country where the tool is
used.
The operator is responsible for operating the equipment in conformity with local legislation.
The equipment is designed for recovering and recycling R1234yf/R134a refrigerant fluid from
automotive A/C plant.
The equipment is intended to be used by automotive and similar repair and service workshops.
The switch between the two gas types, from R134a to R1234yf, can only be performed by a
technician of an Authorised Brain Bee Service Centre, in accordance with the practice described
in Chapter 13 of this manual.
This equipment is intended solely for use by professionally trained operators familiar with the
basics of refrigeration, refrigeration systems, refrigerants and the hazards associated with
pressurised equipment.
A careful reading of the present manual by the owners, the users and the operators is required
for a correct and safe use of the tool.
2.3 MANUFACTURER IDENTIFICATION
The MULTIGAS 8500 PLUS equipment is manufactured by:
Brain Bee S.p.A.
Via Quasimodo, 4/a
43126 Parma (Italy)
Tel. +39 0521 954411 – Fax +39 0521 954490
e-mail contact@brainbee.com
internet http://www.brainbee.com
To Next Page
Loading...