CAP. 3 - SAFETY CONDITIONS 8 / 77 ENGLISH
M
ULTIGAS 8500 PLUS
CAP. 3 - SAFETY CONDITIONS
3.1 PERSONAL SAFETY INFORMATION
3.1.1 Definitions
DANGEROUS AREAS:
Any area within or close to the equipment implying risk for the safety and health of exposed
persons.
EXPOSED PERSON:
Any person completely or partially standing in a dangerous area.
OPERATOR:
The person/s charged with operating the machine for its intended purpose.
CLASSIFICATION OF OPERATORS
The operator can be classified according to two main categories, which, in some cases, refer to
one single person:
• The operator charged with the equipment operation has the duty to:
o Starting up and monitoring the machine's automatic cycle;
o Carry out simple setting operations;
o Remove the causes of equipment stop not implying breakings of members but
simple operation anomalies.
• Maintenance technician
a technician trained by an authorised Brain Bee S.p.A. service
centre, capable of working on the machine's mechanical and electrical components with
its guards open to make adjustments and to service and repair it.
USER
Body or person legally responsible for the equipment.
3.1.2 Personal safety information
The Brain Bee MULTIGAS 8500 PLUS A/C service station is particularly simple and reliable due to
its adjustments and functions. When used correctly it presents no hazard for the operator, on
condition that he observes the following general safety instructions and that the service station is
regularly serviced (incorrect maintenance/use compromise the equipment's safety).
Before operating the service station for the first time, read these instructions carefully. If any part
of the instructions is unclear, contact your reseller or the Brain Bee head offices in Parma.
This service station may be used by only one equipment operator, familiar with A/C and
refrigeration systems and the hazards associated with refrigerants and high pressure equipment.
WORKPLACE: The equipment must be operated in the open or in a well-ventilated location (at
least 1 air change per hour). The workshop has to be equipped with ventilation systems able to
To Next Page
Loading...