ENGLISH 39 / 77 CAP. 9 - SETUP
M
ULTIGAS 8500 PLUS
CLOCK ADJUSTMENT
• by selecting this entry, date and time of the station may be changed.
GARAGE DATA
•
by selecting this entry, one can enter the garage data to be printed on the end of cycle
report. The type of data shown in the print-out are the following
Follow the instructions below:
When you click a line, the keyboard is displayed. Through this keyboard, you can enter values and
confirm with the button „Enter“. The screen-page automatically changes. When the data are
entered, save them through the disk icon.
LANGUAGE
• by selecting this entry, any language present in the database may be set. In case you choose
a language with unintelligible characters, hold down the button
in the starting screen-
page and you will directly return to the language setting menu.
RIGHT/ LEFT HAND DRIVE
• It allows setting the database for operations on A/C systems of vehicles with right-hand or
left-hand drive and return the exact value of gas and oil to be injected.
STARTUP SCREEN
• By selecting this entry, you can decide whether the startup screen of the unit will be the
databank page or the main menu page.
DATABASE ACTIVATION
• by selecting this entry, you will receive the “database activation request code” to be provided
to your distributor in order to be able to buy the database update and subsequently receive
the “database activation code”.
GAS TYPE:
• by selecting this entry, you can learn the type of gas the unit is set for, to change the type of
gas contact an Authorised Brain Bee Service Centre.
Row 2: Address
Row 3: Postcode and city
Row 4: Telephone Number
Row 5: Fax Number
To Next Page
Loading...
