ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd Page 41 of 53
8. On the remote device web configuration page, the Serial port that is tunnelling will show that
the port is connected.
9. In Boost.LAN Manager, the symbol in the image below will be displayed when a device in is
connected in tunnelling mode.
Device Management
On the device management page there are two options. The first to restart the device and the second
to restore the device to factory settings. Before clicking either of the buttons make sure that the device
is not in use.
Restart Device: Clicking this button will reboot the device while keeping all the devices
settings.
Restore Factory Default: Restoring the factory default will revert all the settings of the device
back to the factory defaults and then reboot the device.
To Next Page
Loading...
Need help?
General
