Brainboxes ES Series - Installing Ethernet to Serial Device Driver

ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd Page 15 of 53
Installing Ethernet to Serial Device Driver (Windows 7)
1. Double click the icon labelled “Boost.LAN Manager” on the desktop to open the
application.
2. Click on “File > Find Devices” in the top left hand side of the window. This will find any
Brainboxes Ethernet to Serial devices connected to your network.
3. You can find your Brainboxes ES device by selecting a device and matching it with the
corresponding MAC address available in the left hand panel (see below). The MAC
address of your device is located on a sticker on the side of the ES device.
4. Once found, select the device and scroll to the “Tasks” section on the left hand panel.
5. Click “Install Device”.