ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd Page 33 of 53
7. Configuration Using the Webpage
The ES device can be accessed from any PC, tablet or phone that is connected to your network using
any web browser as this does not require Boost.LAN Manager to be installed.
To access the ES device web page:
1. Obtain the IP Address of the ES device.
2. Enter the IP address into the address bar of your Web Browser and press the enter key.
3. The ES device webpage interface should appear allowing you to view and configure the ES
device settings.
ES devices store the device settings inside the device. When you access the webpage it gets these
settings from the device. When you access the driver it gets the settings from the device too. If you
have Boost.LAN closed and change a setting on the webpage, the device driver will not know that the
settings have been changed on the webpage until Boost.LAN is opened. When Boost.LAN first opens
it will update the settings of any installed devices. Therefore you need to open Boost.LAN manager
after changing a setting on the webpage in order for the driver to use this new setting.
Home page
The Home page of the ES device is mainly for informational purposes whilst the other pages allow
you to update various configuration options.
To Next Page
Loading...
Need help?
General
