5.4 Reference Headband
Introduction
The Reference Headband and Reference Unit for Headband is a reference device used
especially for cases where head fixation is not possible.
Before Using
Only use the Reference Headband with Brainlab navigation systems.
If you calibrate instruments using the calibration point, refer to the Software User Guide.
Components
Figure 26
No. Component Article No.
①
Reference Headband 41878
②
Connector for Headband Reference Unit 41877-10
③
Reference Unit for Headband 41877
How to Attach the Reference Headband
Figure 27
Step
1. Orient the Reference Unit for Headband so that the arrow ② points in the cranial direc-
tion as marked.
REFERENCES
Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking 65
To Next Page
Loading...
