Brainlab CRANIAL/ENT OPTICAL TRACKING - Removing the Skull Reference Package

5.5.3 Removing the Skull Reference Package
Introduction
The following sections describe the different methods for Skull Reference Package removal.
Standard Procedure
①
Figure 33
Step
1. Unscrew and remove the Skull Reference Array.
2. Loosen the tube cap nut ①.
3. Remove the screw with the screwdriver.
4. Remove the Skull Reference Base by pulling it upwards.
REFERENCES
Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking 73