Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7 147
Calibrating Instruments
Calibrating Suction Tubes
Calibration Options You can calibrate suction tubes using:
• Receptacles for standard suction tubes with a straight tip (perform calibration as
described on page 143)
• Pivot points for suction tubes with angled tips
Calibration Using
Pivot Points
To calibrate and verify suction tubes with angled tips, follow the instructions on page 142.
Additionally, keep the following in mind:
Calibration Tips
Make sure that the suction tube tip is perpendicu-
lar to the pivot point.
Rotate the suction tube in the pivot point without
tilting the tip.
To Next Page
Loading...
