6
-
9
MAINTENANCE
6
1. To drain coolant, open the radiator
cap and drain plug and drain cool-
ant completely from the radiator.
2. Flush the radiator until clean water
is drained.
3. Add anti-freeze up to the filler
neck of the radiator.
4. Start and operate the engine for 5
minutes after filling the reservoir
tank with coolant up to the “FULL”
level. At this time, press the heat-
er switch of the air conditioner to
activate the heater. Stop the en-
gine and check if the coolant level
is between the “FULL” and “LOW”
marks. If not, add some coolant as
needed.
REPLACEMENT PROCEDURE
ANTI-FREEZE
The anti-freeze is lowering the freez-
ing temperature of water. The tractor
is lled with appropriate genuine an-
ti-freeze at factory.
(1) Anti-freeze reservoir tank
(A) FULL (B) LOW
CHECKING AND CHANGING COOLANT
CHECKING
Open the hood and check if the cool-
ant level in the reservoir tank is be-
tween the "FULL" and "LOW" marks.
Add coolant through the ller if nec-
essary.
(1) Coolant reservoir tank
(A) FULL (B) LOW
A42O611A
A42O611A
To Next Page
Loading...
