Branson F36r - How to Fold Rops

5
-
14
Branson F36R(H)/F42R(H)
HOW TO FOLD ROPS
1. Loosen the bolt (3) and nut (6) of
the frame. (Do not unscrew them
completely.)
2. Unfold the upper frame backward
after removing the snap pins (4)
and pins (5) on both sides.
3. Fit the pins (5) through the holes
of the frames (1 & 7) and fit the
snap pins (4) into the holes of the
pins (5) to x the frames.
4. Tighten the bolt (3) and nut (6)
rmly.
Do not modify or disassemble
the safety frame without ap-
proval.
•
WARNING
• If the safety frame is incorrectly in-
stalled, it can lead to a severe ac-
cident during a rollover accident.
• Make sure to install the bolts, pins
and nuts properly to set the safety
frame upright securely.
• To fold the safety frame
- The safety frame is heavy. Have
others help you with folding or un-
folding the frame.
- The safety frame may fold abruptly
by its weight. Make sure no injury
is occurred by dropping frame.
- While the safety frame is folded,
do not wear the seat belt.
- When the safety frame is unfold-
ed back and work is done, set the
frame upright immediately before
starting to drive.
CAUTION
Be careful as the frame can
fold by its weight, resulting
in injuries, including head,
shoulder and hand injuries.
•
1
7
5
2
3
4
6
1
7
5
2
3
4
6
A42O530A
A42O531A
K3트랙터-유럽향(Branson 36R,42R))-영문-014 14 2016-01-27 오전 10:57:03