6
-
11
MAINTENANCE
6
CHECKING ELECTRIC WIRING
Open the hood and check if any ca-
ble is in contact with other parts, or if
any insulation is peeled off or dam-
aged, or if any contact is loose. Dam-
aged cables must be repaired by an
authorized dealer. Arrange for peri-
odic maintenance for cables every
50 hours or once a year even though
the cables are not damaged.
CHECKING HOSES AND PIPES
Check the fuel hose, hydraulic steer-
ing wheel hose (pipe), radiator hose,
etc. for damage or leakage. Check if
there is any loose bolt. Replace the
hoses and pipes every 2 years even
if not damaged.
CAUTION
To connect the battery, con-
nect its positive (+) cable rst.
To disconnect the battery, dis-
connect its negative (-) cable
rst.
If the amount of electrolyte is
excessive in each cell during
charging the battery, the metal
part of the tractor can be cor-
roded due to the spilled elec-
trolyte.
Avoid boost charging as pos-
sible.
Charge the battery after re-
moving it from the tractor.
When replacing the battery,
use the BRANSON genuine
battery.
•
•
•
•
•
Make sure that fuel does not
leak through the damaged fuel
hose.
•
DANGER
Before starting to work ev-
ery day, check if any cable is
in contact with other parts, or
if any insulation is peeled off
or damaged, or any contact is
loosened.
Before and after work, remove
any straw or dust on the bat-
tery or cables.
•
•
DANGER
To Next Page
Loading...
