4
-
6
Branson F36R(H)/F42R(H)
CRUISE CONTROL SWITCH
[HST MODEL]
A42O407w
1. When the machine has reached
the desired speed, press cruise
control switch to “ON” Release the
HST pedal and the machine will
operate at the selected speed.
2. When applying full pressure to the
Brake pedals, the cruise control
will deactivated and it will be nec-
essary to reset the cruise control
to the desired speed.
3. When applying light pressure to
the Brake pedals, the machine’s
ground speed will be reduced until
the Brake pedals released. At that
point the machine will continue at
the previous setting.
4. To reset the desired speed, you
should turn off the cruise con-
trol switch then increase machine
speed to reach the desired speed
push cruise switch to on.
CAUTION
When stop the machine cruise
control keep machine stop
status.
Make sure connecting the
both Brake pedals when use
cruise control function.
[Otherwise]
There is a risk abrupt turning
or overturning due to onesided
Braking when the Brake pedal is
depressed.
To Next Page
Loading...
