Branson F36r - Troubleshooting Hydraulic System

7
-
6
Branson F36R(H)/F42R(H)
Symptom Inspection item Action
1. The implement cannot be lifted

Is not the hydraulic ow control dial in the
close position?

Adjust the hydraulic ow control dial

Is the transmission uid level low?

Rell the transmission uid

Is the air not taken in the intake pipe sys-
tem?

Tighten the lter or connection parts. Re-
place the pipe or O-ring if damaged.

Is the oil lter clogged?

Clean or replace it

Is the SC lever in the xed position?

Put the SC lever in the neutral position

Is the hydraulic pump defective?

Contact the dealer for repair

Is the cylinder damaged?

Contact the dealer for repair
2. The implement cannot lower

Is not the hydraulic ow control dial in the
close position?

Adjust the hydraulic ow control dial
3. The implement cannot be lowered
even though the position control le-
ver is placed in the "Lowering"
position

The implement won't be lowered

Contact the dealer for repair

Is not the position control lever on the lowest
position? Move the position control lever

Move the position control lever
TROUBLESHOOTING HYDRAULIC SYSTEM
K3트랙터-유럽향(Branson 36R,42R))-영문-06 6 2016-01-27 오전 10:58:05