Branson F36r - Main Switch; Hazard WARNING FLASHER SWITCH

4
-
4
Branson F36R(H)/F42R(H)
MAIN SWITCH
The main switch is used to start or
stop the engine.
OFF: The engine is stopped, and
current ends at the ignition switch.
ON: Electric current flows to all
switches in the electrical system.
START: When the start motor is en-
gaged, the engine will start. When
the engine is started, release the
key. The key will return to the "ON"
position automatically and the engine
will keep running.
(1) Main Switch (A) OFF
(B) ON (C) START
CAUTION

To start the engine, put the
shuttle shift lever to the "Neu-
tral" position to release the
safety start system.
HAZARD WARNING FLASHER
SWITCH
Press the hazard flasher warning
switch in emergency to warn other ve-
hicles in order to prevent an accident.
Pressing this switch blinks all turn
signal lamps regardless of the posi-
tion of the main switch. Pressing it
againdisablestheasherfunction.
(1) Hazard Warning Flasher Switch
A42O403A A42O424A
K3트랙터-유럽향(Branson 36R,42R))-영문-04 4 2016-01-27 오전 10:55:45