Branson F36r - Range Shift Lever; Hand Throttle Lever; Pto On;Off Switch

4
-
16
Branson F36R(H)/F42R(H)
RANGE SHIFT LEVER
3 speeds can be selected by the
range shift lever. Therefore, in total,
12 forward driving speeds and 12 re-
verse driving speeds are provided by
combination of the main shift lever
and range shift lever.
Make sure to operate the lever while
the tractor is stationary. Shift the le-
ver with the clutch pedal firmly de-
pressed.
(1) Range Shift Lever
The hand throttle lever is to increase
or decrease the engine rpm. This le-
ver is mainly used while working on
aeldwiththeconstantenginerpm.
Increasing engine RPM
Decreasing engine RPM
HAND THROTTLE LEVER
(1) Hand Throttle Lever
(A)
Low Speed (B) High Speed

Use the foot throttle pedal dur-
ing driving for travel, not the
hand throttle lever.
NOTE
PTO ON/OFF SWITCH
(1) PTO ON/OFF Switch
[IND]: In the IND position, the PTO
shaft rotates constantly re-
gardless of the position of the
rear implement.
[LINK]: In the LINK position, the PTO
shaft stops rotation when the
rear implement is lifted to a
certain level. The PTO shaft
rotates again as soon as the
rear implement is lowered.
A42O417A A42O418A
A42O419A
K3트랙터-유럽향(Branson 36R,42R))-영문-016 16 2016-01-27 오전 10:55:49