Branson F36r - HOW to CONNECT Hydraulic HOSE for LOADER ATTACHMENT

5
-
21
OPERATION
5
9. The PTO shaft should not be inter-
fered by any surrounding parts.
CAUTION
If someone is entangled in the
rotating part, it can cause a fa-
tal injury. Always wear protec-
tive gear and install the safety
shields and guards to the drive
line. Don’t wear loose clothing.
Do not remove the installed
protective cover of the PTO
drive shaft without permission.
If working with this protective
cover removed, it can cause
a severe injury. Refer to the
warning decal on the cover.
•
•
1
2
3
5
4
1
2
3
5
4
A42O525A
(1) R2 (2) R1
(3) P2 (4) P1
(5) T
R2R2
R2
P1
P1
P2
R1
P2
R1
C
C
R2
P1
P1
P2
R1
P2
R1
C
C
A42O526A
Before connecting
loader hydraulic hose
(LoADER oUT)
(LoADER in)
HOW TO CONNECT HYDRAULIC HOSE FOR LOADER ATTACHMENT
CAUTION
Before installing a loader, make
sure to stop the engine in ad-
vance and connect its hydraulic
hose.
•
HYDRAULIC CIRCUIT OF FRONT
OUTLET VALVE
After connecting loader
hydraulic hose
When installing a loader, the plug of
the port R1 should be fit to the port
ChAngE LoCATion
K3트랙터-유럽향(Branson 36R,42R))-영문-021 21 2016-01-27 오전 10:57:05