6
-
14
Branson F36R(H)/F42R(H)
CHECKING FUSE AND FUSIBLE LINK
CHECKING AND ADJUSTING
TOE-IN
If the toe-in is not properly aligned,
the steering wheel may be uncontrol-
lable or the tractor may produce an
abnormal vibration.
Measure the distance A and the dis-
tance B of the front wheels and see
if the front one is narrower than rear
one by 0.2- 0.3 in. (4 - 8 mm).
If not, loosen the mounting nuts at
the end of the cylinder rod on both
sides and adjust the length of the
screws.
(1) Mounting nut (2) Cylinder rod
A42O619A
When replacing the fuse, use only the
one with the specified capacity. Open
the fuse box cover and check the fus-
es.
Replace any blown fuses with new
ones of required capacity. Stop the en-
gine and check the main fuses (Fusible
link).
If it is blown again, have the tractor
inspected at the authorized dealer.
(1) Fuse box
A42O618A
CAUTION
When replacing the fuse, use
only the one of the specified
capacity.
•
A42O611U
[HST MODEL]
[MEC. MODEL]
To Next Page
Loading...
