13
en
10. Technical Service
WARNING
Danger to life of patients and users if the product malfunctions and/or
protective measures fail or are not used!
► Do not perform any servicing or maintenance work under any cir-
cumstances while the product is being used on a patient.
► Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
► For service and repairs, please contact your national B. Braun/Aesculap
agency.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Other service addresses can be obtained from the address indicated above.
11. Accessories/Spare parts
12. Technical data
12.1 Classification acc. to Directive 93/42/EEC
12.2 Performance data, information about standards
The product was subject to 500 preparation cycles as a test by the manu-
facturer and has passed.
The performance data for the individual attachments can be found in the
table below.
Art. no. Designation
GB257R ECCOS sieve basket with fixation for GA344
GB262R ECCOS sieve basket with fixation for GA844
GB600 STERILIT Power Systems oil spray
GB600880 Oil spray adapter for GA344/GA844
TA011944 Cleaning brush
GB715R ECCOS holder single
GB716R ECCOS holder triple
GA031R Key for large Jacobs chuck
GA062R Chuck key for small three-jaw chuck
TA014552 Instructions for use, attachments for small drill GA344
and drill GA844 (for ring binder)
TA014553 Instructions for use, attachments for small drill GA344
and drill GA844 (flyer)
Art. no. Designation Class
GB870R Medullary reaming attachment, large Jacobs
chuck
IIa
GB871R Medullary reaming attachment AO large
GB872R Medullary reaming attachment
Hudson/Zimmer
GB878R Drill attachment for Synthes 511.300
GB881R Drill attachment large Jacobs chuck
GB882R Drill attachment small Jacobs chuck
GB884R Drill attachment AO small
GB886R Drill attachment Aesculap hexagon
GB887R Drill attachment dental shaft
GB891R Sagittal saw attachment
GB892R Reciprocating Saw attachment
GB894R Kirschner wire attachment
GB896R Screw attachment AO small
GB897R Screw attachment Aesculap hex
Rotational direction Right and left rotation, oscillation
Conforming to stan-
dard
IEC/DIN EN 60601-1
To Next Page
Loading...
