Brecknell 6702U - Page 44

44 67XXU USB/Serial Scale Service Manual
OUT1
(USB)
SCL.ID YES NO Enable or disable scale ID
number
Prompt is "SCALE ID"
NO
GROSS YES yes Enable or disable gross weight Prompt is "GROSS"
NO
TARE YES yes Enable or disable tare weight Prompt is "TARE"
NO
NET YES YES Enable or disable net weight Prompt is "NET"
NO
COUNT YES NO Enable or disable counts Prompt is "QUANTITY"
NO
PcWT YES NO Enable or disable piece weight Prompt is "PIECE WT"
NO
AD.CDE YES NO Enable or disable ADC code Prompt is "A/D CODE"
NO
BT.VOL YES NO Enable or disable whether to
display the battery voltage
Prompt is "VOLTAGE"
NO
STAUS YES NO Enable or disable scale status Prompt is "STATUS"
NO
B.LINE NONE LINE1 How many blank lines after
strings output
NONE=no blank line
LINE1 LINE1/2/3/4=there are 1, 2,3 or 4
blank lines after strings, used for
paper feed forward 1/2/3/4 lines.
LINE2
LINE3
LINE4
USER
SubMenu1 SubMenu2 Option Default Parameter Description Comment