Bresser 7003360 - Rain; Uv Index & Exposure Level

19
4.3.7 RAIN
The RAIN section shows the rainfall or rain rate information.
1. Rain rate high alert indicator
2. Period of rainfall and rain rate
3. Reading of rainfall or rain rate
1
2
3
4.3.7.1 THE RAIN DISPLAY MODE
Press [ RAIN ] key to toggle between:
- DAY - the total rainfall from midnight (default)
- WEEK - the total rainfall of the current week
- MONTH- the total rainfall of the current calendar month
- TOTAL - the total rainfall since the last reset
- RATE - current rainfall rate (base on 10 min rain data)
- EVENT - rain event is dened as continuous rain, and resets to zero if rainfall accumulation
is less than 10 mm(0.039 in) in a 24 hour period
4.3.7.2 TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold [ RAIN ] key for 6 seconds to reset all the rainfall record.
NOTE:
Erroneous readings may occur during the installation of the 7-in-1 sensor array. Once the
installation is completed and functioning correctly, it’s advisable to clear all the data and start
afresh.
4.3.8 UV INDEX & EXPOSURE LEVEL
The UVI section shows below information:
1. UV index
2. UV exposure level
1
2
4.3.8.1 UV INDEX VS EXPOSURE TABLE
Exposure level Low Moderate High Very high Extreme
UV index 1 2 3 4 5 6 7 8 9 10 11 12~16
Sunburn time N/A 45 minutes 30 minutes 15 minutes 10 minutes
Recommended
protection
N/A
Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Very high or Extreme UV level! Suggest
to wear sunglasses, broad brim hat and
long-sleeved clothing, If you have to stay
outdoors, make sure to seek shade.
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to a󰀨ect the skin.
- The light intensity function is for sunlight detection.