BRIDEX Rudolf R-DPA96 A User Manual

35
RUDOLF - Ref. : 876 583 A
nEt Network type
4NBL Unbalanced three-phase network, 4 wires with 3 or 4 TC
4BL Balanced three-phase network, 4 wires with 1 TC
3NBL Unbalanced three-phase network, 3 wires with 2 or 3 TC
3BL Balanced three-phase network, 3 wires with 1 TC
2BL Two-phase network, 2 ls avec 1 TC
1BL Single-phase network, 2 ls avec 1 TC
Ct Current transfromers
Ct In Neutral current transformer
Ut Voltage transformer
Ut PR Voltage transformer primary
Ut SE Voltage transformer secondary
MAX Maximum mean values
AVG Average value
tIME 4I Integration times for mean and maximum current values
tIME U Integration times for mean and maximum voltage values
tIME F Integration times for mean and maximum frequency values
tIME P/Q/S Integration times for mean and maximum power values
rSET Reset
MAX P+ Active power maximum positive mean value
MAX P- Active power maximum negative mean value
MAX Q+ Reactive power maximum positive mean value
MAX Q- Reactive power maximum negative mean value_A faire valider
MAX S Effective power maximum mean value
HOUr Hour run meter
EA+ Positive active power (+kWh)
EA- Negative active power (-kWh)
ER+ Positive reactive power (+kvarh)
ER- Negative reactive power (-kvarh)
ES Apparent power (-kVAh)
HOUr Hour meter start-up (U or I or Aux. condition)
AUX Auxiliary supply
bACLIt LCD start-up (U or I or Aux. Condition)
SErI Serial number
SOFt Software version
PF Power factor
THD I Current harmonic distortion rate
THD In Neutral current distortion rate
THD U Phase-to-phase voltage distortion rate
THD V Phase-to-neutral voltage distortion rate
Hour run meter
GLOSSARY OF ABBREVIATIONS
R-DPA96 A/AN

BRIDEX Rudolf R-DPA96 A Specifications

General

Brand	BRIDEX
Model	Rudolf R-DPA96 A
Category	Measuring Instruments
Language	English