EasyManua.ls Logo

Broaster 1800GH - Check Valve

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9-3
Preventive Maintenance:
1600:
1800:
1. Use a clean cloth or paper towel to
wipe crumbs from filter hold down and
the filter pan interior before replacing
filter paper. This will help prevent
crumbs from causing a poor seal or
entering the riser line (11) and pump.
Rags or papers contain-
ing cooking oil can
catch fire if exposed to heat. Launder-
ing will not remove the oil. Dispose of
all oil-soiled papers and rags in a trash
container that is in a ventilated area
away from all cooking equipment or
other heat sources such as direct sun-
light.
2. Be sure the O-ring (12) (1600: located
in suction line) is in good condition,
lubricated with cooking oil and
installed correctly.
CHECK VALVE
Prevents cooking oil from draining into the
filter pan from cooking well.
Replacement:
1. Disconnect main electric power sup-
ply.
2. Drain cooking oil from the cooking well
and into a container made for handling
hot oil then close the drain valve.
3. Remove left hand side panel (1800).
1600:
1800:
4. Loosen fitting (13), motor mounting
bolts, remove pipe (14 and 15) (1800:
slide motor back to remove pipe).
Continued:
broaster.com Manual #17270 10/13 Rev 12/14

Table of Contents

Related product manuals