Brocade Communications Systems FastIron X Series Diagnostic Manual

114 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
IPv6 OSPF debug commands
5
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: External LSA(ID= 36) is
Self-originated:
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: External LSA(ID= 38) is
Self-originated:
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: External LSA(ID= 40) is
Self-originated:
Debug: Jan 1 19:21:07 OSPFv3: EXTERNAL ROUTE: Forwarding flag specified
debug ipv6 ospf route-calc-inter-area
Syntax: [no] debug ipv6 ospf route-calc-inter-area
This command displays inter-area route calculations as shown in the following example.
Brocade# debug ipv6 ospf route-calc-inter-area
OSPFv3: route-calc-inter-area debugging is on
Brocade(config-vif-7)# ipv6 ospf area 1
Brocade(config-vif-7)# sOSPFv3: INTER AREA ROUTE: Inter Area Prefix LSA(ID= 2,
prefix 2001:DB8::/64) is Self-originated. Area id 0.0.0.0
OSPFv3: INTER AREA ROUTE: Inter Area Prefix LSA(ID= 2, prefix 2001:DB8::/64) is
Self-originated. Area id 0.0.0.0
Brocade(config-vif-7)# disable
Brocade(config-vif-7)# OSPFv3: INTER AREA ROUTE: Inter Area Prefix LSA(ID= 2,
prefix 2001:DB8::/64) is Self-originated. Area id 0.0.0.0
Brocade(config-vif-7)# enable
Brocade(config-vif-7)# OSPFv3: INTER AREA ROUTE: Inter Area Prefix LSA(ID= 11,
prefix 2001:DB8::/64) is Self-originated. Area id 0.0.0.0
Brocade(config)# Debug: Jan 1 00:32:22 OSPFv3: INTER AREA ROUTE: Inter Area route
for prefix 2001:DB8::/64 created
debug ipv6 ospf route-calc-intra-area
Syntax: [no] debug ipv6 ospf route-calc-intra-area
This command displays intra-area route calculations as shown in the following example.
Brocade# debug ipv6 ospf route-calc-intra-area
OSPFv3: route-calc-intra-area debugging is on
Brocade(config-if-e1000-8/9)# Debug: Jan 1 19:22:33 OSPFv3: Calculating Intra
Area routes for area 0.0.0.0
Debug: Jan 1 19:22:33 OSPFv3: INTRA AREA ROUTE: Calculating Intra Area Stub
Routes
Debug: Jan 1 19:22:33 OSPFv3: INTRA AREA ROUTE: Can't find Prefix LSA for id
0.0.0.0 AdvRouter 10.4.4.8
Debug: Jan 1 19:22:43 OSPFv3: Calculating Intra Area routes for area 0.0.0.0
Debug: Jan 1 19:22:43 OSPFv3: INTRA AREA ROUTE: Calculating Intra Area Stub
Routes
Debug: Jan 1 19:22:43 OSPFv3: INTRA AREA ROUTE: Can't find Prefix LSA for id
0.0.0.0 AdvRouter 10.4.4.8
debug ipv6 ospf route-calc-spf
Syntax: [no] debug ipv6 ospf route-calc-spf

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English