To Next Page

To Previous Page

124 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

IPv6 RIP debug commands

The following debug commands display debugging information for the IPv6 Routing Information

Protocol (RIP).

debug ipv6 rip events

Syntax: [no] debug ipv6 rip events

This command displays debugging information about the IPv6 RIP events.

Brocade# debug ipv6 rip events

Brocade(config-vif-11)# RIPng: update timer expired

clear ipv routeRIPng: triggered update

RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0

from :: on interface NULL

RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0

from :: on interface NULL

RIPng: Adding local connected route 2001:DB8::1/64 on interface v11

RIPng: Adding local connected route 2001:DB8::1/64 on interface v12

RIPng: update timer expired

RIPng: Redistribute add route 2001:DB8::/64, type CONNECTED (1/0)

debug ipv6 rip receive

Syntax: [no] debug ipv6 rip receive

This command displays debugging information about the IPv6 RIP packets received.

Brocade# debug ipv6 rip receive

Brocade(config-vif-11)# RIPng: received packet from fe80::224:38ff:fe9f:7500 port

521 on interface v11