Brocade Communications Systems FastIron X Series Diagnostic Manual

82 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
Web debug commands
4
Brocade# debug ip vrrp packet v6
VRRP (IPv6): packet debugging is on
VRRP (IPv6): rcvd packet! ver:3 type:1 vrid:10 pri:255 #ip:1 aut:0 adv:100
chk:53518
Num of ip addr 1
fe80::7:2 from sender 2000::7:2
VRRP (IPv6): rcvd packet! ver:3 type:1 vrid:11 pri:255 #ip:1 aut:0 adv:200
chk:53417
Num of ip addr 1
fe80::8:2 from sender ::
VRRP (IPv6): send advertise! ver:3 type:1 vrid:100 pri:255 num of ip:1 adv:100
chk:44853
Num of ip addr 1
2000::7:1
VRRP (IPv6): rcvd packet! ver:3 type:1 vrid:10 pri:255 #ip:1 aut:0 adv:100
chk:53518
Num of ip addr 1
fe80::7:2 from sender 2000::7:2
10.10.10.2 from sender 10.10.10.2
debug ip vrrp events
Syntax: [no] debug ip vrrp events
This command displays debugging information of VRRP events only within the device.
Brocade# debug ip vrrp events
VRRP: events debugging is on
[44fd]VRRP (IPv4): 10.10.10.1 transit to master! IP addr 10.10.10.2 vrid 10, pri
100
[44fd]VRRP (IPv6): fe80::7:1 transit to master! IP addr fe80::7:1 vrid 10, pri 100
[4511]VRRP (IPv6): fe80::8:1 transit to master! IP addr fe80::8:1 vrid 11, pri 255
debug ip vrrp vrid
Syntax: [no] debug ip vrrp vrid decimal
This command filters VRRP or VRRP-E debugging using a virtual router identifier (VRID). The
decimal variable refers to the VRID.
Brocade# debug ip vrrp vrid 100
Debug VRID: 100 for both IPv4 and IPv6 instances
Web debug commands
The following debug ip web commands display information about the web transactions.
debug ip web
Syntax: [no] debug ip web
This command activates the web debugging.
Brocade# debug ip web
WEB: debugging is on

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English