Brocade Communications Systems FastIron X Series Diagnostic Manual

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference 57
53-1002965-01
GRE debug commands
4
DHCP Option82: 20 bytes added.
DHCP Option82: Adding option 82
DHCP: snooping on for vlan 14, port 3/1/23
DHCP: rcv on port 3/1/23, intercept DHCP pkt, Offer
DHCP Option82: Removing option 82
DHCP Option82: 19 bytes removed.
DHCP Option82: Removing option 82
DHCP: snooping on for vlan 14, port 5/1/2
DHCP: rcv on port 5/1/2, intercept DHCP pkt, Request
DHCP: snooping on port 5/1/2, smac 0000.00ce.ac79, type 3, VRF 1
0.0.0.0->0000.00ce.ac79
DHCP Option82: Adding option 82
DHCP Option82: 20 bytes added.
DHCP Option82: Adding option 82
GRE debug commands
debug ip gre log
Syntax: [no] debug ip gre log
This command activates the tunnel events debugging.
Brocade# debug ip gre log
Apply mtu 1400 failed for tunnel 11 as all mtu profiles are used
Clearing PMTU for tunnel 11 due to ip mtu 1400 configuration
Tunnel Create Sync-Receive event for tunnel: 11
Tunnel Create Sync-Successful for tunnel: 11
Tunnel Update TS Sync-Receive event for tunnel: 11
Tunnel Update TS Sync-Successful for tunnel: 11
Tunnel Update Nhop Sync-Receive event for tunnel: 11
Tunnel Update Nhop Sync-Successful for tunnel: 11
Tunnel Update TTI Sync-Receive event for tunnel: 11
Tunnel Port Up Sync-Receive event for tunnel: 11
Tunnel Port Up Sync-Successful for tunnel: 11
Tunnel Port Down Sync-Receive event for tunnel: 11
Tunnel Port Down Sync-Successful for tunnel: 11
Tunnel Update MTU Sync-Receive event for tunnel: 11
Tunnel Update MTU Sync-Successful for tunnel: 11
Tunnel Delete Sync-Receive event for tunnel: 11
Tunnel Delete Sync-Successful for tunnel: 11
Tunnel Delete Nhop Sync-Receive event for tunnel: 11
Tunnel Delete Nhop Sync-Successful for tunnel: 11
Tunnel Delete TTI Sync-Receive event for tunnel: 11
Tunnel Delete Origination entry Sync-Receive event for tunnel: 11
Tunnel Delete Origination entry Sync-Successful for tunnel: 11
process_one_l3_unicast_update: entryType 6
Fill Sync Tunnel Entry-Bad parameters. Failed for tunnel: 11
Fill Sync Tunnel Entry-Bad TS entry. Failed for tunnel: 11
pack_tunnel_entry_change called with tunnel_index: 11 operation:
TUNNEL_SYNC_UPDATE_NHOP
pack_tunnel_entry_list called with tunnel_index: 11 operation:
TUNNEL_SYNC_CREATE_ALL, from_beginning: 1
Sync-ing tunnel entry 11
[pp_puma_tunnel_hotswap_insert] No tunnel start info for tunnel 11
DEBUG 0x8: Tunnel 11 already deleted
DEBUG 0x8: Tunnel 11 pp_delete_tunnel_entry

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English