Brocade Communications Systems FastIron X Series Diagnostic Manual

164 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
PIM-SM snooping debug commands
6
join_prune_timer, (10.11.10.101 225.1.1.1) ->num=1, rpt=0, am_rp_and_proxy=0,
JOIN
join_prune_timer, (10.11.10.101 225.1.1.1) ->num=1, rpt=0, spt=1, SRC=v100,
RP=v100
join_prune_timer, (10.11.10.101 225.1.1.1) fail RPT PRUNE cond.
join_prune_timer, (10.11.10.101 226.1.1.2) ->num=1, rpt=0, am_rp_and_proxy=0,
JOIN
join_prune_timer, (10.11.10.101 226.1.1.2) ->num=1, rpt=0, spt=1, SRC=v100,
RP=v100
join_prune_timer, (10.11.10.101 226.1.1.2) fail RPT PRUNE cond.
Join list: (10.11.10.101 225.1.1.10) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.9) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.8) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.7) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.6) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.5) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.4) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 226.1.1.1) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.3) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.2) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 225.1.1.1) wc=0 rpt=0 sparse=1
Join list: (10.11.10.101 226.1.1.2) wc=0 rpt=0 sparse=1
debug ip pim show
Syntax: debug ip pim show
This command displays the PIM debug settings. Do not use the show debug command for this
purpose. The show debug command displays general debug information.
Brocade# debug ip pim show
pim debug-enable-any = 1
debug ip pim level 2 is enabled
debug ip pim vrf
Syntax: debug ip pim vrf vrf_name
This command displays the PIM related debugging information for the specified VRF.
Brocade# debug ip pim vrf vrf1
Debug: Jan 1 21:46:55 PIM_CFG.VRF1: port v85, ena_mode Dis
Debug: Jan 1 21:46:59 PIM_CFG.VRF1: port v85, ena_mode Ena
Debug: Jan 1 21:48:14 PIM_CFG.VRF1: port v85, ena_mode Dis
Debug: Jan 1 21:48:17 PIM_CFG.VRF1: port v85, ena_mode Ena
PIM-SM snooping debug commands
The following commands display information related to the Protocol Independent Multicast Sparse
mode (PIM-SM) snoop debugging.
debug pimsm-snoop clear
Syntax: [no] debug pimsm-snoop clear
This command clears all the PIM-SM snooping debug settings.

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English