Brocade Communications Systems FastIron X Series Diagnostic Manual

12 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
Software licensing debug command
2
Software licensing debug command
This section describes the debug command that generates software licensing information.
debug license
Syntax: [no] debug license
This command is used to display the package information on which the license has been loaded.
The license information is encoded as Hexa decimal values and can be displayed only when the
show license command is used with the license index; for example, show license unit 1 index 1.
Before enabling debugging::
Brocade# show license unit 1 index 1
License information for unit 1 license <1>:
+license name: FCX-ADV-LIC-SW
+lid: deyHHGLhGvz
+license type: trial
+status: active
+license period: 30 days
Trial license information:
+days used: 0
+hours used: 0
+days left: 30
+hours left: 0
After enabling debugging::
Brocade# debug license
License all debugging ON
Brocade(config)# show license unit 1 index 1
License information for unit 1 license <1>:
+license name: FCX-ADV-LIC-SW
+lid: deyHHGLhGvz
+license type: trial
+status: active
+license period: 30 days
Trial license information:
+license precedence: 1
+days used: 0
+hours used: 0
+days left: 30
+hours left: 0
Brocade license information:
+pkg info: 0X200

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English