Brocade Communications Systems FastIron X Series Diagnostic Manual

70 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
RIP debug commands
4
Debug: Jan 1 02:38:55 OSPF: Schedule SPF(6002), in prog 0, ospf
build_routing_table 0 phase 1
Debug: Jan 1 02:38:55 OSPF: timer: give semaphore, start spf phase 1, time 96789,
scheduled 96788, run time 96788
Debug: Jan 1 02:38:55 OSPF: begin intra SPF run, chunk-id 0/-1 just_become_abr 0,
is_abr 0
Debug: Jan 1 02:38:55 OSPF: invalidate whole routing table, recal_just_become_abr
0, just_become_abr 0
Debug: Jan 1 02:38:55 OSPF: running SPF for area 0 area-18ce7068 nextarea 0
next-area-id -1
Debug: Jan 1 02:38:55 OSPF: completed SPF for all areas
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_INTRA end at 96789, is_abr 0
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_TRANSIT end at 96789
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_TYPE5 end at 96789
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_TYPE7 end at 96789
Debug: Jan 1 02:38:55 OSPF: summary phase, is_abr 0
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_SUMMARY end at 96789
Debug: Jan 1 02:38:55 OSPF: translation phase, is_abr 0
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC PHASE_TRANSLATION end at 96789
Debug: Jan 1 02:38:55 OSPF: SPF_cleanup: current 96789, set next run time 96788,
current hold 0, next hold 0
Debug: Jan 1 02:38:55 OSPF: ROUTE CALC end at 96789, pending 0
debug ip ospf vrf
Syntax: [no] debug ip ospf vrf
This command generates debugging information about the OSPF Virtual Routing and Forwarding
(VRF) instance.
Brocade# debug ip ospf vrf
OSPF(one): send hello on area 0 interface 10.3.4.1
RIP debug commands
The following debug commands display debugging information for the Routing Information Protocol
(RIP).
debug rip database
Syntax: [no] debug rip database
This command displays RIP database events.
Brocade# debug rip database
Brocade(config-vif-11)# RIP(default-vrf): (v2) process response packet
header: type:RESPONSE PACKET, version:2
RIP(default-vrf): refresh 10.1.2.0/24 metric 3 from 10.5.5.2 ve 11
RIP(default-vrf): existing route metric 2 from 10.4.4.1 ve 12
RIP(default-vrf): refresh 10.24.2.0/24 metric 4 from 10.5.5.2 ve 11
RIP(default-vrf): existing route metric 4 from 10.5.5.2 ve 11
RIP(default-vrf): (v2) process response packet
header: type:RESPONSE PACKET, version:2
RIP(default-vrf): refresh 10.24.2.0/24 metric 4 from 10.4.4.2 ve 12
RIP(default-vrf): existing route metric 4 from 10.5.5.2 ve 11

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English