Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference 185
53-1002965-01
Chapter
9
Technical Support Diagnostics
This chapter contains the following sections:
•show tech-support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
•Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
show tech-support
The show tech-support command is useful when collecting a large amount of information about the
Brocade FastIron devices for troubleshooting purposes. The output of this command is used by
technical support representatives when reporting a problem.
show tech-support
Syntax: [no] show tech-support [acl | cluster | cpu | license | l2 | l3 | memory | multicast |
packet-loss | stack]
• acl - Generates system and debugging information specific to ACL configurations and counters.
• cluster - Generates system and debugging information specific to cluster configurations.
• cpu - Generates CPU related information.
• license - Generates license related information.
• l2 - Generates system and debugging information specific to Layer 2 configurations.
• l3 - Generates system and debugging information specific to Layer 3 configurations.
• memory - Generates memory related information of the device.
• multicast - Generates system and debugging information specific to layer 2 and layer 3
multicast configurations.
• packet-loss - Generates packet statistics related debugging information.
• stack - Generates system and debugging information specific to stacking configurations.
The show tech-support command displays the output of several show commands at once. The
output from this command varies depending on the router configuration.
The default output of the show tech-support command includes the following information:
• Running configuration
• Image version
• Port status
• Port counters
• Static and dynamic log buffers
• dm statistics
• Boot, monitor, and system.
To Next Page
Loading...
Need help?
General
