186 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
show tech-support
9
• Registers information
• Possible stack trace
• Active stack (if applicable)
• Last packet (Application Data)
• Possible data structure
• MCT cluster details
• License details
The following example shows the truncated output of the show tech-support command.
Brocade# show tech-support
Current configuration:
!
ver 07.4.00b1T7f3
!
stack unit 1
module 1 fcx-48-poe-port-management-module
module 2 fcx-cx4-2-port-16g-module
!
!
enable snmp config-tacacs
hostname FxRouter
ip route 0.0.0.0 0.0.0.0 172.26.64.1
!
logging console
username brocade password .....
tacacs-server host 172.26.50.95 auth-port 49 default key 1 $d=
tacacs-server host 172.26.50.94 auth-port 49 default key 1 $bn^^s
tacacs-server host 172.26.50.93 auth-port 49 default key 1 $r=?!\!
tacacs-server host ipv6 :: auth-port 49 default key 1 $!66i
tacacs-server key 1 $!66i
snmp-server community ..... ro
snmp-server community ..... rw
snmp-server community ..... rw
interface management 1
ip address 172.26.67.52 255.255.240.0
!
!
!
end
Copyright (c) 1996-2011 Brocade Communications Systems, Inc.
UNIT 1: compiled on Dec 20 2011 at 08:58:01 labeled as FCXR07400b1
(7155950 bytes) from Secondary FCXR07400b1.bin
SW: Version 07.4.00b1T7f3
Boot-Monitor Image size = 369369, Version:07.3.00T7f5 (grz07300b1)
HW: Stackable FCX648S-HPOE-PREM (PROM-TYPE FCX-ADV-U)
==========================================================================
UNIT 1: SL 1: FCX-48GS POE 48-port Management Module
Serial #: BCYXXXXXXXX
License: FCX_ADV_ROUTER_SOFT_PACKAGE (LID: deaHHJIhFJv)
P-ENGINE 0: type DB90, rev 01
P-ENGINE 1: type DB90, rev 01
PROM-TYPE: FCX-ADV-U
==========================================================================
UNIT 1: SL 2: FCX-2XGC 2-port 16G Module (2-CX4)
To Next Page
Loading...
Need help?
General
